Whirlpool 195428 Manual De Usuario

Descargar
Página de 40
17
If you experience
Possible Causes
Solution
First try the solutions suggested here or visit our website at www.whirlpool.com/help  
for assistance and to possibly avoid a service call.  
Washer not performing as expected (cont.)
It is normal for small amounts of water to remain in dispenser at the 
end of the cycle.
Water in dispenser after cycle has 
finished.
Color-safe bleach or oxi products 
was added to liquid chlorine  
compartment.
Add color-safe bleach or oxi products to the HE detergent  
compartment or directly to the washer basket before adding the 
load. Do not use the chlorine bleach dispenser for color-safe bleach 
or oxi products.
TROUBLESHOOTING
Incorrect dispenser 
operation (cont.)
Spin time is added if an unbalanced load is detected. The  
washer will attempt to redistribute the load with additional  
tumbling.
Not using correct cycle for load type.
When using the Delicate cycles, you should wash small loads.  
This ensures a gentle wash for your garments without increasing 
cycle times. 
Normal washer operation.
The cycle times vary automatically based on your water  
pressure, water temperature, detergent, and clothes load.  
The options you select will also affect the cycle times that are 
shown in the Cycle Guide.  
Cycle time changes or 
cycle time too long
Excessive suds in washer.
Load may be out of balance.
When excessive suds are detected, a special suds routine  
automatically starts to remove extra suds and ensure proper 
rinsing of your garments. This routine will add time to the  
original cycle. 
When load unbalance occurs, an washing process will will start 
to redistribute the load. This extends the cycle. Avoid washing 
single items. Balance a single item such as a rug or jacket with 
a few extra items.