Gaggenau rc 462/413 rf 411/413 rf 461/463 rf 471 rw 414/464 Manual De Usuario

Note:
When bending the water line, do not kink it, otherwise 

there is a risk of leaks and water damage.
1. Remove the cap from the appliance connection.
2. Bend the water line according to the location of the 

connection on the appliance.

3. Push the union nut and seal onto the water line.
4. Push the end of the water line into the appliance 

connection and screw on the union nut.

5. Using the open-ended wrench, tighten the union nut. 

Do not overturn!

6. Push back the water line into the guard tube as far as 

possible.

7. Open the shut-off valve and main water tap. 
8. Check the connection on the shut-off valve and on 

the appliance for leaks.

9. Close the shut-off valve.

dispenser)
Note:
Avoid misaligning the door while aligning the ice and 

water dispenser!
The ice and water dispenser can be adjusted within the 

section of the furniture door. In this way, it is possible to 

undertake parallel adjustment to the furniture door in 

order to achieve an optimal overall impression.
The gap must be exactly the same all the way round (a)
and
the front surface of the ice and water dispenser must be 

aligned exactly parallel with the door front (b).

Aligning ice and water dispenser:
1. Loosen the nuts on the 4 setting screws with 

a wrench.