Graco 309572ZAG Manual De Usuario
Warnings
309572ZAG
7
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. When
these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and
warnings not covered in this section may appear throughout the body of this manual where applicable.
tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. When
these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and
warnings not covered in this section may appear throughout the body of this manual where applicable.
WARNING
WARNING
WARNING
WARNING
ELECTRIC SHOCK HAZARD
The hoses must be grounded. Improper grounding, set-up, or usage of hoses can cause electric
shock.
shock.
•
Turn off and disconnect power before installing or servicing hoses.
•
Connect only to grounded power source.
•
All electrical wiring must be done by a qualified electrician and comply with all local codes and
regulations.
regulations.
•
Never cut or puncture a hose cover.
•
Do not expose to rain. Store indoors.
SKIN INJECTION HAZARD
High-pressure fluid from hose leaks, or ruptured components will pierce skin. This may look like just a
cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.
•
cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.
•
Inspect hose before each use for cuts, bulges, kinks or any other damage.
•
Replace damaged hose immediately.
•
Replace hoses proactively at regular intervals based on your operating conditions.
•
Tighten all fluid connections before operating the equipment.
•
Keep clear of leaks.
•
Do not stop or deflect leaks with your hand, body, glove, or rag.
•
Never exceed hose Maximum Pressure or Temperature ratings.
•
Only use chemicals that are compatible with hose materials. See Technical Data in this manual.
Read Safety Data Sheet (SDS) and fluid and solvent manufacturer’s recommendations.
Read Safety Data Sheet (SDS) and fluid and solvent manufacturer’s recommendations.
•
Follow the Pressure Relief Procedure when you stop spraying/dispensing and before cleaning,
checking, or servicing equipment.
checking, or servicing equipment.
THERMAL EXPANSION HAZARD
Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in pressure due to
the thermal expansion. Over-pressurization can result in equipment rupture and serious injury.
•
the thermal expansion. Over-pressurization can result in equipment rupture and serious injury.
•
Open a valve to relieve the fluid expansion during heating.
•
Replace hoses proactively at regular intervals based on your operating conditions.
BURN HAZARD
Equipment surfaces and fluid that is heated can become very hot during operation. To avoid severe
burns:
•
burns:
•
Do not touch hot fluid or equipment.