Honeywell PW-6000 Manual De Usuario

PW-6000 Installation

System Configuration via Web Interface

PW-6000 Installation Guide, Document 800-00005, Revision A

Serial-RS232, Serial-RS485, Serial-Modem, or Serial-CoBox Connection Types

Figure 10: PW-6000 Host Port Configuration with Serial RS-232 Connection

1. From the PW6000 Communication Address drop-down list, select one of the eight (0 to 7)

available communication addresses for the PW-6000 board.

Note:

In the previous panels, this selection was made through setting the virtual DIP switches.

2. For the Primary Host Port, make the following selections:

a. Connection Type. From the drop-down list, select Serial-RS232. Select one of the

following as appropriate: Serial-RS232, Serial-RS495, Serial-Modem, Serial-CoBox.

b. Data Security. Select one of the following values from the drop-down list: None,

Password/no AES, Password/AES.

c. Select a Baud Rate from the drop-down list.

d. Select a Flow Control from the drop-down list.