Honeywell PW-6000 Manual De Usuario

PW-6000 Installation and Configuration Guide, Document 800-00005, Revision A

 

The PW-6000 web server’s host port configuration requires corresponding changes in 
the way the Pro-Watch’s channels are configured. The PW-6000 web server host 
ports and the Pro-Watch channel ports must have the correct values to communicate 
with each other.

Follow these steps:

1. Set the PW-6000 hardware configuration:

a. On the controller board, set the jumpers J8, J9, J10 on Port1 to 

RS-485.

b. On Port1, connect the pins as follows:

– pin1  =  TR+

– pin2  =  TR-

– pin5  =  GND to RS-485 terminals of the Intelligent “Auto” 

Converter PW5K1CVT1 (i.e., PW-5000 RS-232/RS-485 
converter)

c. Connect the RS-232 terminal of the PW5K1CVT1 converter to the 

serial port of your Pro-Watch application server.

2. Set the host port configuration of the PW-6000 web server:

a. Login to the Access Control Device Server Configuration Manager.

b. Set the Primary Host fields as follows:

– Connection Type = IP Server

– Port  Number  =  3001

– Data Security = Allow All

c. Set the Alternate Host Port fields as follows:

– Connection Type = Serial-RS-485

– Baud  Rate=  38400

– Data Security = None

– Flow Control = RTS Toggle