Smeg SHC520X Manual De Usuario

 

 

 

 

 

 

 

Turns the lighting system on and off. 

-  

Press and hold for approx. 2 seconds to turn the 
lighting system on and off at reduced intensity. 

- 

Turn the suction motor on and off at speed one.  

On. 

Press and hold the button for approximately 2 
seconds, with all the loads turned off (Motor and 
Lights), to reset the Filters and turn off the Leds that 
are lit.  

After 100 working hours all the 
LEDs (L1-L2-L3-L4) will light up 
and remain lit to indicate saturation 
of the metal grease filters.  

After 200 working hours all the 
LEDs (L1-L2-L3-L4) will light up 
and start to flash to indicate 
saturation of the activated charcoal 
filters. 

Turn the suction motor on at speed two.  

On. 

Press and hold for approximately 5 seconds, with all 
the loads turned off (Motor and Lights), to 
enable/disable the Remote control.  

2 flashes, Remote control Enabled. 

1 flash, Remote control Disabled. 

Turn the suction motor on at speed three. 

On.  

Press and hold the button for 2 seconds to activate 
intensive speed. This speed is timed to run for 10 
minutes. At the end of this time the system will 
automatically return to the speed set before. 

 

Press and hold the button for approximately 2 
seconds to activate automatic shutdown with a 30' 
delay (Motor+Lights).  

On. 

 

Press and hold for approximately 5 seconds to 
enable/disable the Activated Charcoal Filter alarm. 

2 Flashes of the Leds (L1-L2-L3) 
Filter Alarm Enabled.  

1 Flash of the Leds (L1-L2-L3) 
Filter Alarm Disabled.