Samsung DA99-01906A Manual De Usuario

Leg

screw Driver

<case 1>

Leg

screw Driver

<case 2>

100mm

100mm

gEtting rEaDy to instaLL tHE rEfrigErator

LEVELLing tHE rEfrigErator

If the front of the appliance is slightly higher than the rear, the door can be opened and 
closed more easily.

case 1) The appliance tilts down to the left.

                •  Turn the left adjusting leg in the direction of the arrow until the appliance is 

level.

case 2) The appliance tilts down to the right.

                •  Turn the right adjusting leg in the direction of the arrow until the appliance is 

level.

at least 

50mm

1,440mm

1,495mm

at least 
50mm

<TYPE 1>

at least 

50mm

1,380mm

1,425mm

at least 
50mm

<TYPE 2>

When installing, servicing, or cleaning behind the refrigerator, be sure to pull the 

unit straight out and push back in straight after finishing.

Also, make sure your floor supports the full-load refrigerator.

Otherwise, it may cause floor damage.

•  Please tie up the extra length of the power cord at the 

back of the refrigerator so as not to be touched on the 
floor preventing the power cord from being crushed by 
the rollers upon relocation.

setting up

 

01 
s

E

tting

 u

P

•  Allow clearance to the right, left, back and top when installing. This will help reduce 

power consumption and keep your energy bills lower.

• Do not install the refrigerator where the temperature will go below 10°C.