Simrad AP26 Manual De Usuario

Simrad AP26 and AP27 Autopilots 

116

 

20221586B

 

 

•  Remove the EPROM from the socket by means 

of the special extraction tool (p/n 44139806). 

•  Insert the tool by pressing the two grip pins 

down into the two slots in the corners of the 
socket. 

•  Squeeze the tool and pull out the EPROM. 
•  The identification tag indicates: 

-  Name of unit 
-  Part number 
-  Software version 

Caution! 
When inserting a new EPROM, make sure 
the cut-off corner matches with the one in 
the socket. Press it gently into the socket. 
 
EPROM for AC10, AC20 and AC40 
Autopilot Computers:  P/N 22088462 
After change of EPROM, perform a master 
reset as described on page 112. 

 

 

Autopilot 
Computer 
EPROM 

Cut-off 
corner 

Slots 

Identification 
tag