Simrad AP26 Manual De Usuario

Installation 

20221586B

 29 

NAV

 

 

−  NAV mode 
−  Course to steer (CTS): 260 is 

set internally by the autopilot 
to steer the boat onto the track 
line. 

−  Cross track error (XTE): 0.010 

nm to stbd. 

Note ! 

For Cross Track Error, the number of decimals shown depends 
on the output from the GPS/chart plotter. Three decimals give a 
more accurate track keeping. 
Alternatively, the NAV mode display can show the following 
information by a long press on the TURN/DODGE/INFO 
button: 

 

−  Next waypoint: Egersund 
−  Bearing from current position 

to the next waypoint (BPW): 
270°M 

−  Distance to waypoint: 10 nm 
−  Steering parameter: LO-M 
−  Rudder angle: 00° 

When operating the autopilot in NAV mode to steer through a 
route of waypoints, the autopilot will steer to the first waypoint 
in the route after you accept the first waypoint as the location to 
steer towards. When you arrive at the waypoint, the autopilot 
will output an audible warning, display an alert screen with the 
new course information, and automatically change course onto 
the new leg. 

Note ! 

°

NAV

 

Alert screen. Press NAV button to 
verify course change larger than 
10°. 
If no verification is received, the 
autopilot will continue on the 
current set course in AUTO mode.