Garmin Flight Deck 100 Manual De Usuario
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
28
SYSTEM OVERVIEW
REVERSIONARY MODE
NOTE:
The system alerts the pilot when backup paths are utilized by the LRUs. Refer to the Appendices for
further information regarding system-specific alerts.
Reversionary mode is a mode of operation in which all important flight information is presented identically
on at least one of the remaining displays (see Figure 1-21). Transition to reversionary mode should be
straightforward for the pilot, for flight parameters are presented in the same format as in normal mode.
straightforward for the pilot, for flight parameters are presented in the same format as in normal mode.
Figure 1-21 Reversionary Mode
Reversionary mode is activated by pressing the dedicated DISPLAY BACKUP button at the bottom of the
audio panel (see Figure 1-22 and refer to the Audio Panel section for further details). Pressing this button again
deactivates reversionary mode.
deactivates reversionary mode.
Figure 1-22 DISPLAY BACKUP Button
Pressing the DISPLAY
BACKUP button activates/
deactivates reversionary
mode for both the on-side
PFD and the MFD.
Each display can be configured to operate in reversionary mode, as follows:
• PFD1 – By pressing the DISPLAY BACKUP button on the left audio panel.
• MFD – By pressing the DISPLAY BACKUP button on the left or the right audio panel.
• PFD2 – By pressing the DISPLAY BACKUP button on the right audio panel.