Garmin Flight Deck 100 Manual De Usuario

®

190-00728-04  Rev. A

448

The AFCS Control Unit is positioned above the MFD, and has the following controls:

  

Activate/deactivate the selected flight director (pilot- or copilot-side) in default 

vertical and lateral modes

Press the other FD Key to toggle the corresponding PFD’s Command Bars off/on

Selects/deselects Navigation Mode

Selects/deselects Heading Select Mode

Engages/disengages the autopilot

Engages/disengages the yaw damper

Selects/deselects Altitude Hold Mode

Selects/deselects Vertical Path Tracking Mode for Vertical Navigation flight control

Selects/deselects Vertical Speed Mode

Selects/deselects Flight Level Change Mode

  

Adjust the Selected Course (while in VOR, LOC, or OBS Mode) in 1° increments on

the Horizontal Situation Indicator (HSI) of the corresponding PFD

Press to re-center the Course Deviation Indicator (CDI) and return course pointer

directly TO the bearing of the active waypoint/station

Adjusts the Airspeed Reference and bug in 1-kt (0.01 M) increments

Press to toggle the Airspeed Reference units from IAS to Mach

Adjusts the Vertical Speed Reference and bug in 100-fpm increments

Adjusts the Selected Altitude and bug in 100-ft increments (a finer resolution of 10

feet is available under approach conditions)

Selects/deselects Current Speed Control (if available) when Altitude Hold Mode is

active

Selects the PFD data source (pilot-side or copilot-side) for the Flight Director.

When the flight director source is switched, the modes revert to default. An arrow

in the AFCS Status Box indicates the active FD source (pilot- or copilot-side).

Adjusts the Selected Heading and bug in 1° increments on the HSI (both PFDs)

Press to synchronize the Selected Heading to the current heading on the pilot-side PFD

Selects/deselects Approach Mode

Manually selects/deselects Low Bank Mode