GTO 12 Manual De Usuario

  GTO 4000XLS Instruction Manual © 01.10.12  

Pinch Area

MAX 22"

Clamp

Level Operator

Fence Post

Clevis Pin, Bushing, and Hairpin Clip

LEVEL horizontal cross member

Mark cross member through middle of
gate bracket slots and drill 1/2" holes 

Round Tube & Chain Link Gate

Square Tube Gate

Mounting Plate Created 

for Decorative Gate 

(required but not supplied)

FRONT VIEW

SIDE VIEW

FRONT VIEW

SIDE VIEW

Remove the clevis pin from the front 

mount and while supporting the gate 

operator, swing the gate and gate 

operator to the closed position. With 

the gate and gate operator in the closed 

position check the clearance and be sure 

that the gate operator is not binding at 

the post pivot bracket.
If you don’t have 2” clearance or the

gate operator is binding on the post 

pivot bracket, remove the bolt in the 

post bracket and readjust the pivot 

bracket until you can achieve the proper 

clearance.
With the post pivot bracket in the optimum position for clearance and freedom of movement, replace the 

bolt in a post bracket adjustment hole and secure with washer and lock nut. Return the operator to the 

open position and reattach the gate bracket. Recheck the gate operator level and clearance in the open 

position. Adjustment of the gate bracket will be necessary if the post bracket was moved. After verifying 

clearance, make sure the gate bracket is clamped securely.

Detach the front mount from the gate 

bracket.  Check that the gate bracket 

holes are centered over the scribe 

line. Mark the gate in the center of the 

gate bracket holes. Remove the gate 

bracket and drill the 

1

/

2

” holes through 

the gate cross member and attach the 

gate bracket using the 

1

/

2

” x 2 

3

/

4

” bolts, 

washers and lock  nuts.

Make sure the gate is in the open 

position and the operator arm is fully 

retracted. Attach the operator to the 

securely bolted post bracket assembly 

and gate bracket using clevis pins, 

bushings, and hairpin clips, or optional 

Pin Lock  [FM345]. Verify that the 

operator is level, bolts are tight, and 

adjust the post bracket assembly if 

necessary.