GTO R4854 01 Manual De Usuario

  GTO 4000XLS Instruction Manual © 01.10.12  

Because automatic gate operators produce high levels of force, consumers need to know the potential 

hazards associated with improperly designed, installed, and maintained automated gate operator 

systems.  Keep in mind that the gate operator is just one component of the total gate operating system. 

Each component must work in unison to provide the consumer with convenience, security, and safety.

This manual contains various safety precautions and warnings for the consumer. Because there are 

many possible applications of the gate operator, the safety precautions and warnings contained in 

this manual cannot be completely exhaustive in nature. They do, however, provide an overview of the 

safe design, installation, and use of this product. 

SYSTEM DESIGN, INSTALLATION, AND USE OF THIS PRODUCT. 

Precautions and warnings in this manual are identified with this 

warning symbol.  The symbol 

identifies conditions that can result in damage to the operator or its components, serious injury, or 

death.

CAUTION: The gate can be opened and closed manually when the operator is disconnected.  

  1.  Turn operator power switch (Control Box) OFF.
  2.  Remove hairpin clip, clevis pin, and bushing from both the front and 

rear mounting points.

  3.  Remove the operator from the mount.

CAUTION: Because the GTO gate operator is battery powered, 

NOTE: Substitute a Pin Lock 

 

[FM345] for the clevis pin on the front 

mount of the gate operator to prevent unauthorized removal of the 

operator from the gate.     

Clevis Pin

Hairpin Clip

Gate Bracket

Front Mount

Bushing