Cisco Systems 2960 Manual De Usuario
10-57
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Configuring 802.1x Authentication
This example shows how to set 2 as the number of authentication attempts allowed before the port moves
to the restricted VLAN:
to the restricted VLAN:
Switch(config-if)# dot1x auth-fail max-attempts 2
Configuring the Inaccessible Authentication Bypass Feature
You can configure the inaccessible bypass feature, also referred to as critical authentication or the AAA
fail policy.
fail policy.
Beginning in privileged EXEC mode, follow these steps to configure the port as a critical port and enable
the inaccessible authentication bypass feature. This procedure is optional.
the inaccessible authentication bypass feature. This procedure is optional.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
radius-server dead-criteria
time time tries tries
time time tries tries
(Optional) Set the conditions that are used to decide when a RADIUS server is
considered unavailable or dead.
considered unavailable or dead.
The range for time is from 1 to 120 seconds. The switch dynamically determines the
default seconds value that is 10 to 60 seconds.
default seconds value that is 10 to 60 seconds.
The range for tries is from 1 to 100. The switch dynamically determines the default
tries parameter that is 10 to 100.
tries parameter that is 10 to 100.
Step 3
radius-server deadtime
minutes
minutes
(Optional) Set the number of minutes that a RADIUS server is not sent requests. The
range is from 0 to 1440 minutes (24 hours). The default is 0 minutes.
range is from 0 to 1440 minutes (24 hours). The default is 0 minutes.