Cisco Systems 2960 Manual De Usuario

This example shows how to configure a local banner with the custom message My Switch:

Switch(config) configure terminal

Switch(config)# aaa new-model

Switch(config)# aaa ip auth-proxy auth-proxy-banner C My Switch C 

Switch(config) end

For more information about the ip auth-proxy auth-proxy-banner command, see the “Authentication 
Proxy Commands” section of the 

on Cisco.com.

This example shows how to remove the web-based authentication session for the client at the IP 
address 209.165.201.1:

Switch# clear ip auth-proxy cache 209.165.201.1

Perform this task to display the web-based authentication settings for all interfaces or for specific ports:

This example shows how to view only the global web-based authentication status:

Switch# show authentication sessions

This example shows how to view the web-based authentication settings for gigabit interface 3/27:

Switch# show authentication sessions interface gigabitethernet 3/27

Return to privileged EXEC mode.

(Optional) Save your entries in the configuration file.

clear ip auth-proxy cache {* | host ip address}

Delete authentication proxy entries. Use an asterisk to 
delete all cache entries. Enter a specific IP address to 
delete the entry for a single host.

clear ip admission cache {* | host ip address}

Delete authentication proxy entries. Use an asterisk to 
delete all cache entries. Enter a specific IP address to 
delete the entry for a single host.

 

[interface type slot/port] 

Displays the web-based authentication settings.

type = fastethernet, gigabitethernet, or tengigabitethernet

(Optional) Use the interface keyword to display the 
web-based authentication settings for a specific interface.