Cisco Systems 2960 Manual De Usuario
30-6
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
Chapter 30 Configuring SNMP
Configuring SNMP
Note
The switch might not use sequential values within a range.
Configuring SNMP
•
•
•
•
•
•
•
•
•
•
Default SNMP Configuration
shows the default SNMP configuration.
Tunnel
5078–5142
Physical (such as Gigabit Ethernet or SFP
2
-module interfaces)
10000–14500
Null
14501
1.
SVI = switch virtual interface
2.
SFP = small form-factor pluggable
Table 30-3
ifIndex Values (continued)
Interface Type
ifIndex Range
Table 30-4
Default SNMP Configuration
Feature
Default Setting
SNMP agent
Disabled
1
.
1.
This is the default when the switch starts and the startup configuration does not have any snmp-server global configuration
commands.
commands.
SNMP trap receiver
None configured.
SNMP traps
None enabled except the trap for TCP connections (tty).
SNMP version
If no version keyword is present, the default is Version 1.
SNMPv3 authentication
If no keyword is entered, the default is the noauth (noAuthNoPriv)
security level.
security level.
SNMP notification type
If no type is specified, all notifications are sent.