Graco 1000 STETM Manual De Usuario

• To adjust:  Press both buttons down and 

move shield to desired position closest to 
child.  Release buttons to lock shield into 
place.  Check by pulling out on shield.

NOTE: Shield does not need to contact
child when in closest position; harness 
system restrains child.

A Loosen harness straps:

Lift adjuster lever and pull 
harness straps out (see       ).

B Remove both harness strap loops from 

Splitter Plate on back of car seat.

C Change harness strap slots.

Make sure harness straps are threaded 
through matching slot of seat pad and 
car seat.  

It may be necessary to remove seat pad 
from top of car seat.

D Re-attach harness strap loops to Splitter 

Plate:

Slide each harness strap loop onto
Splitter Plate.

• Make sure both strap loops are securely

attached within Splitter Plate hook.

• Make sure straps are NOT twisted and

are routed behind stand (fig. f).