Garmin 320 Manual De Usuario

Problems and Solutions

■

Make sure your paper is loaded printable side up (usually the whiter, brighter, 
or glossy side). Load it short edge first, and against the right side. Don’t load 
paper above the arrow mark inside the edge guide.

■

Make sure the paper you loaded matches the paper size and paper type settings 
on the control panel or in your printer software (see page 14). 

■

Position your original against the back left corner of the scanner glass. If the 
edges are cropped, move your original away from the edges slightly. Place the 
document flat against the scanner glass.

■

Printing stops when an ink cartridge is expended. If a color cartridge is 
expended, you may be able to continue printing temporarily with black ink; 
see the online User’s Guide for more information. If the black cartridge is 
expended, you must replace it to continue printing.

If paper doesn’t feed correctly, remove the paper and fan the sheets, then reload 
them as shown on page 4. Do not load too many sheets at once. 

If paper has jammed, follow these steps:

1. Gently pull out jammed paper from the output tray or sheet feeder.

2. If paper is stuck inside, press the P

On

 button to turn off the product. Lift 

the scanner, remove the jammed paper, close the scanner, and turn on the 
product.

If documents don’t feed correctly in the Automatic Document Feeder (ADF), 
make sure the paper is not bent, folded, or curled. If paper has jammed:

1. Open the ADF cover and remove any jammed 

paper.

Caution: 
Do not try to remove the paper without opening the 
ADF cover or you could damage the mechanism.