Samsung MS89F Manual De Usuario

Failure to observe the following safety precautions may result in harmful 

exposure to microwave energy.

(a)

 

Under no circumstances should any attempt be made to 

operate the oven with the door open or to tamper with the safety 

interlocks (door latches) or to insert anything into the safety 

interlock holes.

(b)

 

Do NOT place any object between the oven door and front 

face or allow food or cleaner residues to accumulate on sealing 

surfaces. Ensure that the door and door sealing surfaces are 

kept clean by wiping after use first with a damp cloth and then 

with a soft dry cloth.

(c) Do NOT operate the oven if it is damaged until it has been 

repaired by a qualified microwave service technician trained by the 

manufacturer. It is particularly important that the oven door closes 

properly and that there is no damage to the:
(1) Door (bent)
(2) Door hinges (broken or loose)
(3) door seals and sealing surfaces

(d) The oven should not be adjusted or repaired by anyone other than 

a properly qualified microwave service technician trained by the 

manufacturer.

This product is a Group 2 Class B ISM equipment. The definition of group 

2 which contains all ISM equipment in which radio-frequency energy is 

intentionally generated and/or used in the form of electromagnetic radiation 

for the treatment of material, and EDM and arc welding equipment.

For Class B equipment is equipment suitable for use in domestic 

establishments and in establishments directly connected to a low voltage 

power supply network which supplies buildings used for domestic 

purposes.

Make sure that these safety precautions are obeyed at all times.

Only qualified staff should be allowed to modify or 

repair the microwave oven.

Do not heat liquids and other food in sealed 

containers.

For your safety, do not use high-pressure water 

cleaners or steam jet cleaners.

Do not install this appliance; near heater, 

inflammable material; in a humid, oily or dusty 

location, in a location exposed to direct sunlight 

and water or where gas may leak; on un level 

ground.

This appliance must be properly grounded in 

accordance with local and national codes.

Remove all foreign substances such as dust or 

water from the power plug terminals and contact 

points using a dry cloth on a regular basis.

Do not pull or excessively bend or place heavy 

objecton the power cord.

In the event of a gas leak (such as propane 

gas, LP gas, etc.), ventilate immediately without 

touching the power plug.

Do not touch the power plug with wet hands.

Do not turn the appliance off by unplugging the 

power plug while an operation is in progress.

Do not insert fingers or foreign substances, If any 

foreign substance such as water has entered the 

appliance, unplug the power plug and contact 

your nearest service centre.

MS89F_XEU-03818C_EN.indd   5

2011-02-14     2:39:26