Bakers Pride FW-15L Manual De Usuario

8.  Using a 1/8” drill bit, drill holes in countertop through existing holes in the main unit and collar weldment 

flanges. 
 

9.  Secure main unit and collar weldment to countertop using #8 sheet metal screws. 

 

10.  Feed power cord (supplied), down through hole in countertop. 

 

11.  Reattach louvered blower box to main unit. 

 

12.  Seal main unit to the countertop to conform to NSF Standard 4, Item 4.28. (Dow Corning RTV #732 Multi 

purpose Sealant.) 
 

13.  Place the blower pan into the hole making sure that open side of the pan fits over the two tabs on the 

louvered blower box. 
 

14.  Place the perforated pan insert into the blower pan.