GE PSS25NGN Manual De Usuario

12

Not all features are on all models.

The beverage rack is designed to hold 
a bottle on its side. It can be attached to 
any slide-out shelf.

Line up the large part of the slots on 
the top of the rack with the tabs under
the shelf.

Then slide the rack back to lock it 
in place.

The refrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the way and are securely
sealed.

When opening and closing the door you
will notice a stop position. If the door is
opened past this stop point, the door will
remain open to allow you to load and
unload food more easily. When the door 
is only partially open, it will automatically
close.

The resistance you feel at the stop 
position will be reduced as the door 
is loaded with food.

When the door is only partially open, 
it will automatically close.

Beyond this stop the door will stay open.

If doors are uneven, adjust the refrigerator
door. 

Using a 7/16

″

socket wrench, turn the

door adjusting screw to the right to
raise the door, to the left to lower it. 
(A nylon plug, imbedded in the
threads of the pin, prevents the pin
from turning unless a wrench is used.) 

After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.

To remove the base
grille, open the doors,
remove the screw at
each end of the base
grille and then pull
the grille straight out. 

7/16

″

Socket Wrench

Raise