Remington Power Tools 104317 Manual De Usuario

ENGLISH

www.desatech.com

IMportaNt SaFEtY INForMatIoN

warNING: Some dust created by

power sanding, sawing, grinding, drill-

ing, and other construction activities

contains chemicals known (to the state

of california) to cause cancer, birth de-

fects, or other reproductive harm. Some

examples of these chemicals are:

• lead from lead-based paints

• crystalline silica from bricks and ce-

ment and other masonry products

• arsenic and chromium from chemi-

cally-treated lumber

Your risk from these exposures varies,

depending on how often you do this

type of work. to reduce your exposure

to these chemicals: work in a well venti-

lated area, and work with approved safety

equipment, such as those dust masks

that are specially designed to ﬁlter out

microscopic particles.

warNING: this product contains

chemicals known to the State of cali-

fornia to cause cancer or birth defects,

or other reproductive harm.

9. Grip chain saw ﬁrmly with both hands. Never

operate chain saw with one hand. Never use

hand guard as handle.

10. Grip pole saw securely. Place one hand on the

pole and the other on the handle.

11. Keep ﬁnger off trigger until ready to make

cut.

12. Before starting chain saw, make sure chain is

not touching anything.

13. To guard against electrical shock, avoid body

contact with grounded objects such as pipes,

fences, and metal posts.

14. Keep all parts of body away from chain when

saw is running.

15. Do not force saw while cutting. Apply light

pressure. It will do the job better and safer at

the rate for which it was intended.

16. Do not cut small brush and saplings with the

pole saw. Use the chain saw only, with extreme

care. Slender matter may catch in the chain and

be whipped toward you. This could also pull

you off balance.

17. When cutting limb or tree trunk that is under

tension, use extreme caution. Be alert for

wood springing back. When wood tension is

released, limb could spring back and strike

operator causing severe injury or death.

18. Carry saw from one place to another

• with saw stopped and unplugged

• Chain saw - by holding front handle (never

use hand guard as handle)

• Pole saw - with telescoping pole returned to

shortest position

• Pole saw - by holding the pole at the balance

point (close to saw end)

• with ﬁnger off trigger

• with guide bar and chain to rear

warNING: Kickback may occur when

the nose or tip of the guide bar touches

an object, or when the wood closes in

and pinches the saw chain in the cut.

tip contact in some cases may cause a

lightning fast reverse reaction, kicking the

guide bar up and back towards the opera-

tor. pinching the saw chain along the top

of the guide bar may push the guide bar

rapidly back towards the operator. Either

of these reactions may cause you to lose

control of the saw which could result in

serious injury to user.

KIcKBacK

This saw has a low-kickback chain and reduced

kickback guide bar. Both items reduce the chance

of kickback. Kickback can still occur with this

saw.
Follow assembly instructions on page 10. Do not

remove front hand guard. Do not replace front

hand guard with substitute.
The following steps will reduce the risk of kick-

back:

• Use both hands to grip saw while saw is

running

KIcKBacK SaFEtY DEvIcES oN

tHIS Saw