Datamax I-4206 Guía De Instalación Rápida

Ì

Ø

  Rotate the Printhead

Latch and raise the
printhead

Ø

  Slide the Roll Media

onto the Media Hub

Ø

 

Route the Media as
shown

è

Í

ŒPause: Toggles the pause condition.

•Feed: The FEED button feeds a

label, and clears any faults
that have been corrected.

ŽCancel:Cancels a job and pauses the

printer.

•Menu: Toggles between the ready

and menu mode.

•Test:

Enables the quick test mode,
see the Operators Manual
for additional information.

ŒArrow Up:

Moves to the next item in the
menu tree, (increase values).

•Arrow Down:Moves to the previous item in

the menu mode, (decrease
values).

ŽEnter:   

Selects a displayed item or
value.

•ESC:

Moves to the previous menu
level.

ŒReady:

On indicates ready,

blinking indicates menu mode.

•Stop: On indicates paused state.

ŽError: On indicates a fault. To clear a fault

press the feed button.

Î

With the Printer On, and loaded with media (at least 4 inches wide):

Ø

  Verify the printer is in the ‘Ready Mode’

è

Ø

  Press the 

    button.

Ø

  Using the 

 button scroll to ‘Print Config Label’.  Press the

 button again, after a brief hesitation the printer will print one

Configuration Label.

‘

Refer to the Operator’s Manual for the Printhead Cam Adjustment when
using narrow media.

Be sure to follow and perform the suggested Cleaning Schedule listed in
the Operator’s Manual.

Corporate Headquarters

(407) 578-8007

Technical Support

(407) 523-5540