Lexmark Optra T Guía Del Usuario
106
Using the Print and Hold Function
Using the Print and Hold Function
When sending a job to the printer, you can specify in the driver that
you want the printer to hold the job in memory and not print it imme-
diately. When you are ready to print the job, you must go to the
printer and use the operator panel menus to identify which held job
you want to print.
you want the printer to hold the job in memory and not print it imme-
diately. When you are ready to print the job, you must go to the
printer and use the operator panel menus to identify which held job
you want to print.
N
OTE
: Print and Hold functions require a
minimum of 8MB available printer
memory. We recommend a minimum of
16MB available printer memory and a
hard disk.
memory. We recommend a minimum of
16MB available printer memory and a
hard disk.
You can use this function to:
•
Request extra copies of a job at a later time.
•
Delay printing a job.
•
Verify one copy before printing additional copies.
•
Print a confidential job when you are able to be at the printer
to retrieve it .
to retrieve it .
For more information about each of the four types of held jobs, go to
the page indicated below:
the page indicated below:
•
•
•
•