Hasselblad 646 Manual De Usuario
Front Panel
A
Feed Table: place original holders here for scanning.
B
Light Area:
for viewing originals. The grid helps you to align your
transparent originals.
C
Transparency Holder Guide
: all transparency holders fit between
two rails to keep them straight.
D
Original Holder Clasp:
all original holders slide into a slot here and
are held in place by a magnetic clasp.
E
Power Switch with indicator lights
: press to turn the unit on/off.
The switch can light up in 3 different colors indicating the following:
Green (Power/Ready)
Green (Power/Ready)
- remains lit when ready to scan. Flashes
when first installed to indicate that firmware must be loaded (it will
be loaded automatically when you run FlexColor).
Yellow (Motor Drive)
Yellow (Motor Drive)
- when the scanner is repositioning the optics
to scan in a new format or when drum is repositioning.
Red (Scanning)
Red (Scanning)
- when scanning. Do not touch the scanner while
the indicator is red. If the light is flashing when not scanning, then
an error has occurred - please contact your Flextight dealer for
assistance.
User's Guide - Flextight 646
Hardware Reference - Flextight 646
9
Front Panel
English
E
D
B
C
A
Figure 1: Front panel features of Flextight 646