Mitsubishi wd-52525 Manual De Propietario

46

              Chapter . . . 

Edit NetCommand

®

, Change or Delete Devices, Finish Screen

Finish Screen

To finalize your selections and complete the 

NetCommand setup, select 

Finish from the Finish 

screen. 

Note:  To change any of the inputs or names 
for the devices, or add devices not included in 
the initial settings, select Edit to display the Edit 
NetCommand menu.  

NetCommand does not allow you to delete 
a device or change the connections for a 
device (like a VCR or a DVD player) if the 
device (input) is currently being displayed by 
the TV.

Switch the TV to a different device from the 
one you are changing or deleting.  To change 
the A/V receiver, you need to be listening to 
the TV speakers.

Change Device Screen

Selecting Change from the Setup menu screen, 
displays the Change screen. To change a device, 
select the device by name, not type.  You can change 
the name or input connections to the TV and A/V 

receiver.  If “Other” is selected for the manufacturer 
then you can also “Learn”.  The rest of the screens that 
follow are the same as when you Add a device.

Delete Device Screen

Selecting Delete from the Setup menu, displays the 
Delete screen.  You can choose to delete a single 
device by selecting the device you would like to 
delete, or you can delete the entire NetCommand 
configuration.  After you have chosen the device, or 
the entire configuration, you will be prompted to 
confirm your choice to delete.  If you select the Entire 
Configuration, the Initial button becomes available on 
the Edit NetCommand screen.  If you delete a device 
that you learned the remote control signals for the 

learned signals are erased.