Mitsubishi wd-57733 Manual De Usuario

Cable Box, 
Camcorder, 
DVD, DVD2, 
DVR, Game, 
HD Disc, 
Satellite, VCR, 
PC, 
On/Off (ANT 
1/ ANT 2 only)
Off (HDMI 
only

•  Assign or change names of inputs appearing in the 

Input Selection 

menu.

•  Turn 

Ant-1 and Ant-2 On or Off.

•  Turn unused HDMI inputs 

Off.

•  Press      to move between inputs.
•  Press     to select a name.
•  If you change the name of an input after performing NetCommand 

“learning,” the IR codes you “learned” are erased.

Note:  When you disconnect an HDMI device, the icon remains in the Input 
Selection menu until you remove it.  To remove an unwanted HDMI icon, 
select 

Off for the HDMI input.

Put frequently used icons at the start of the 

Input Selection menu.

1.  Press          to highlight the icon to move.
2.  Press 

ENTER to confirm the selection.

3.  Press          to drag the icon to the desired position.
4.  Press 

ENTER to set the new position.

Y series and 734 series only
•  Perform initial set-up of NetCommand control of a device.
•  Add or remove individual keys from NetCommand control of a device.

See detailed instructions in chapter 6, “NetCommand.”

Y series and 734 series only
Set up NetCommand control of an A/V receiver.  This set-up allows you to:
•  Operate the A/V receiver’s power and volume functions with the TV’s remote control.
•  Make the A/V receiver switch automatically to the correct audio input when you select a 

device in the TV’s 

Input Selection menu.

See detailed instructions in chapter 6, “NetCommand.”

Note:
•  NetCommand IR control of home-theater devices is 

available on Y series and 734 series models only.

•  When you change an input name in the 

Name 

menu and then exit the 

Name menu:

 

The name is changed

 

The icon in the 

Input Selection menu is changed

 

Settings are changed to the defaults for the 
new device type.

 

On models offering NetCommand control, all 
“learning” for the input is also erased.