Mitsubishi WS-55517 Manual De Usuario

1.  Press ADJUST   or   on the TV remote to select the 

check box for each function to be learned. 

2.  Press ENTER and the function name will begin to 

flash to confirm the ready-to-learn status.

3.  Press the button on the A/V Receiver’s remote 

control that corresponds to the selected function,  
A check mark will appear and the function name 
will stop flashing.  This confirms the signal learned 
status.

4. To test the learned command, press ENTER on 

the TV remote.  The A/V Receiver will perform the 
selected function.  The A/V Receiver needs to be 
turned on and the IR emitters properly placed for 
the test to be successful (see page 22 for IR emitter 
placement).

5.  Repeat for each function to be learned. 

6.  To erase a learned function, highlight the check box 

for that function and press CANCEL.

7.  When the function signals have been learned, press 

ADJUST   to select Next> and move to the Name 
screen.

NetCommand can now learn the remote control signals 
used to select each input on the A/V Receiver.  

1.  Press ADJUST   or   on the TV remote to select the 

check box for each function to be learned. 

2.  Press ENTER and the function name will begin to 

flash to confirm the ready-to-learn status.

3.  Press the button on the A/V Receiver’s remote 

control that corresponds to the selected function.  
A check mark will appear and the function name 
will stop flashing.  This confirms the signal learned 
status.

4. To test the learned command, press ENTER on 

the TV remote.  The A/V Receiver will perform the 
selected function.  The A/V Receiver needs to be 
turned on and the IR emitters properly placed for 
the test to be successful (see page 22 for IR emitter 
placement).

5. To customize the input names, press ADJUST   to 

move to the Input Name text box and then press  
ADJUST 

 or 

 and ENTER to select each letter of 

the name.  These names will appear on the Review 
screen as the A/V Receiver’s input names.

6. To erase the learned input signal, highlight the check 

box for that input and press CANCEL.  

7.  Repeat for each connected input.

8.  When the input selection signals have been learned 

and the inputs named, press ADJUST   to select 
Next> and move to the A/V Receiver Learn screen.