Mitsubishi WS-55517 Manual De Usuario

To select another device or input, press ADJUST 

,   , 

 or 

  on the TV’s remote to move the 

highlight.  Press ENTER to select the device to view 
and hear.  The TV inputs are automatically changed.  If 
NetCommand is set up, the inputs on compatible A/V 
Receivers are automatically changed at the same time.

  

 

 

 

Some devices will power On automatically when you 
select the device and will power Off when you turn 
off the TV.  For devices that do not power On or Off 
automatically, display the Device Selection menu, press 

ADJUST   or    to highlight the device icon and press 

POWER on the remote control.  For the A/V Receiver, 
press AUDIO to move the navigation to the Audio 
Section.  Highlight the  A/V Receiver icon and press 
POWER.  If you press POWER on the remote control 
when the Device Selection menu is not displayed, the 

TV will turn Off.

The TV icon shows the destination for the device 

highlighted in the Device Section.

The Connection Section shows the other devices 

currently connected to the device highlighted in the 
Device Section.  For example, if the digital VCR (DVCR) 
is currently recording on Ant-1, the DVCR icon will 
appear in the Connection Section when you move the 

highlight to the Ant-1 icon.  This icon will disappear 
when you move the highlight to another icon. 

When a NetCommand pre-memorized or learned IR 
controlled A/V Receiver has been connected to the TV 
and added to NetCommand Setup, an AVR icon will 
appear in the audio section.  Press AUDIO  to change 

navigation to the audio section.  Then press ADJUST 

,  , 

 or 

 to select the TV speakers icon or the 

A/V Receiver icon.  Press ENTER to change the audio 

selection.  Press DEVICE to return the navigation to the 
Device Section.

When you press DEVICE on the TV’s remote control, the Device Selection menu (Figure 26) displays.  If 
NetCommand® has not been set up, the Device Selection menu allows you to select an input for viewing.  If 
NetCommand is set up, the Device Selection menu allows you to select the device for viewing, select audio from 
the TV speakers or A/V Receiver, power compatible devices On or Off, and verify the destination of signals. On the 
Device Section menu, the device or input currently displayed appears as a gold-colored icon.   

The PIP Selection menu displays when you press the PIP 

DEVICE button on the remote control.  This menu has the 
same general format as the Device Selection menu.  The 
destination for the Video Section is the sub picture and 
the Audio and Connection Sections are not available.
Use ADJUST  ,  , 

 or 

  to move the highlight to 

the device to show in the PIP or POP screen, then 
press ENTER.  Device icons that are grayed out are 
not available for use as PIP/POP sources or with the 
current source.