Mitsubishi WS-55517 Manual De Usuario

Your TV is able to start and stop recordings 

automatically and send the signals from one external 
playback device to another external recording device.  
It is also able to convert digital channels and IEEE 1394 
device signals to analog signals that can be recorded 
on NetCommand compatible analog VHS and S-VHS 

VCRs.  You cannot record from an analog channel or 
device or a VHS or S-VHS VCR to a digital recording 
device such as a DVCR or A/V Disc.

You can schedule the recording to take place at a 

later time and program the recording duration for a 
minimum of 30 minutes and a maximum of 6 hours (in 

30 minute increments).  The default is 1 hour.

When a digital recording is being made, the TV will 
direct the signals to the recording device using the 
IEEE 1394 cable. When an analog recording is being 

made, the TV will direct signals to the recording device.

During a recording, the TV can be powered Off.  If the 

TV is powered On, it must be tuned to the source that 

is being recorded.

Can be used when viewing Antenna 1 or 2, an IEEE 

1394 device, or a non-recording traditional device. 

To initiate recording now: 

 

 

 

1. Press REC (record) on the TV remote.

2. Press DEVICE on the remote control to move to the 

Source Device section.

3. Press ADJUST   or   to select the source device 

you will record from.

4. Press ENTER to confirm selection and return to the 

“Record to” section.    

5. In the “Record to” section, review the destination 

device (VCR) and duration.  Change if necessary. 

 

6.  Press REC a second time to initiate recording.

To initiate a time-delayed recording: 

 

 

1.  Press REC (record) on the TV remote.

2. Press DEVICE on the remote control to move to the 

Source Device section. 

3. Press ADJUST   or   to select the source device 

you will record from.

4. Press ENTER to confirm your Record from selection 

and move to the Record to section.

5. Press ADJUST   or   to select the Record to 

device, duration time, start time (press ENTER after 
selecting hour, minutes and AM or PM to set the 
time) and day.  For devices that can select channels, 
select the channel.

6.  Select Add and press ENTER to add the recording 

to the record list.  If your selection is successful, a 
confirmation message will be displayed.  If you pick 
overlapping times, day(s), or destination devices, 
you will see a message stating there is a conflict.

7. To exit, press HOME after all recordings have been 

added.

When attempting to record copy-protected material, the 
Record functions of the NetCommand and IEEE 1394 
systems may be prevented or stopped.  If you have a 
recording that is tagged “Record Once”, NetCommand 
will change the tag to “Record No More”.