Mitsubishi WS-55517 Manual De Usuario

A peer-to-peer connection allows the IEEE 1394 

devices in your TV network to talk to each other 
without the further need of TV intervention once the 
peer-to-peer connection is established.

For example, the TV can setup a connection for an 

A/V Disc or DVCR that sends a recorded program to 

an IEEE 1394 monitor in another room.  NetCommand 
will establish the connection between the two devices.  
Once the connection has been established, the TV 
can be turned off or used to watch another device.  
Recording from digital channels to a DVCR is also a 
peer-to-peer connection.  In this case, the TV is one of 
the devices in the peer-to peer connection.

Analog or traditional (non-digital) devices can not be 

used for peer-to-peer connections. 

A peer-to-peer connection is a current connection and 

cannot be setup as a delayed connection.

To establish a peer-to-peer connection:

1. Press REC on the TV remote.

2.  Press DEVICE on the remote control to move to the 

Source Device section. 

3. Press ADJUST    or   to select the source device 

you will record from.

4. Press ENTER to confirm selection and return to the 

“Record to” section.    

5. In the “Record to” section, review the destination 

device (example: DVCR) and duration.  Change if 

necessary.

6.  Press REC a second time to initiate recording.

NOTE:  Multiple peer-to-peer connections can 
occur simultaneously, sometimes with the same 
source device.  Also, please note that peer-to-peer 
connections are NOT listed on the Record List  
screen. 

When a peer-to-peer connection has been established, 
you can cancel the connection by highlighting the 
source device in the Device Selection menu.  Confirm 
that the on-screen icon for the peer-to-peer connection 

is highlighted in the Connection Section next to the 

TV icon, then press  CANCEL.  The peer-to-peer 

connection will end and the destination icon will be 

removed.  If there is more than one peer-to-peer 

connection for the same device, all of the connections 
will all be canceled.