Mitsubishi WS-55517 Manual De Usuario

1.  Snap open the molding clips on the right and 

left side of the screen.  The side closest to the 
screen opens. Unsnap the top, bottom and middle, 
preferably in that order (the clips are fixed to the TV 
and are not detachable).  Do not force the clips, they 
should open easily.  Proceed to steps 2-4.

Open
molding
clip

Closed
molding
clip

Clips are shown
lighter for clarity

Opening the
molding clip

2.  To remove the Diamond Shield, slide it out of the 

channels, starting with the top.  Gently bow the 
Diamond Shield towards you and push the top out 
of the channel, then lift straight up to remove it from 
the bottom channel.

4.  Re-install the molding clips for a finished look, by 

pushing them back into place, starting at a corner.  
Do not use force. 

To install the Diamond Shield, reverse the process for 

your model.

The Diamond Shield for the WS-55517 and WS-65517 comes installed by the factory.  If you prefer, it can be removed 
using the steps on these pages.  The molding clips can only be removed as described, incorrect removal of the 
molding clips can damage the Diamond Shield.

3.  Wipe off any dust with a lint-free cloth and store the 

shield carefully where it will not be scratched. This 
completes the Diamond Shield removal.