Cradlepoint Technology mbr1200 Guía Del Usuario
CRADLEPOINT
MBR1200 | USER MANUAL Firmware ver. 1.6.12
© 2010 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 110
8.2 Active Sessions
The Active Session sub-menu displays the full details of active sessions to
your router. An Internet session is a conversation between a program or
application on a LAN-side computer and a program or application on a WAN
side computer.
your router. An Internet session is a conversation between a program or
application on a LAN-side computer and a program or application on a WAN
side computer.
Local.
The IP address and, where appropriate, port number of the local
application.
NAT.
The port number of the LAN-side application as viewed by the WAN side
application.
Internet.
The IP address and, where appropriate, port number of the application on the Internet.
Protocol.
The communications protocol used for the conversation.
State.
State for sessions that use the TCP protocol.
NO: None -- This entry is used as a placeholder for a future connection that may occur.
SS: SYN Sent -- One of the systems is attempting to start a connection.
EST: Established -- The connection is passing data.
FW: FIN Wait -- The client system has requested that the connection be stopped.
CW: Close Wait -- The server system has requested that the connection be stopped.
TW: Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed.
LA: Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed.
CL: Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets still pending.
Dir.
The direction of initiation of the conversation:
Out. Initiated from LAN to WAN.
In. Initiated from WAN to LAN.
Priority. The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher priority.
Time Out.
The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends on the type
and state of the connection.
300 seconds. UDP connections.
240 seconds. Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the
connection can be re-established.
connection can be re-established.
7800 seconds. Established or closing TCP connections.