Cradlepoint Technology mbr1200 Guía Del Usuario

CRADLEPOINT

MBR1200 | USER MANUAL Firmware ver. 1.6.12

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 59

5.10.2

Add Traffic Shaping Rule

A  Traffic  Shaping  Rule  identifies  a  specific  message  flow  and
assigns  a  priority  to  that  flow.  For  most  applications,  automatic
classification  will  be  adequate,  and  specific  Traffic  Shaping  Rules
will not be required.

Traffic Shaping supports overlaps between rules,  where more than
one  rule  can  match  for  a  specific  message  flow.  If  more  than  one
rule is found to match the rule with the highest priority will be used.

Enable.

Specifies whether the entry will be active or inactive.

Name.

Create a name for the rule that is meaningful to you.

Priority.

The priority of the message flow is entered here--1

receives the highest priority (most urgent) and 255 receives the
lowest priority (least urgent).

Protocol.

The protocol used by the messages.

Local IP Range.

The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.

Local Port Range.

The rule applies to a flow of messages whose LAN-side port number is within the range set here.

Remote IP Range.

The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.

Remote Port Range.

The rule applies to a flow of messages whose WAN-side port number is within the range set here.

Save/Update.

Record the changes you have made.

Clear.

Re-initialize this area of the screen, discarding any changes you have made.

When you are done editing the settings, you must click the Save Settings button at the top of the page to make the changes effective and
permanent.

(continued)