Cradlepoint Technology mbr1200 Guía Del Usuario
CRADLEPOINT
MBR1200| USER MANUAL Firmware ver. 1.6.12
© 2010 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 79
6.3.4
Modem Specific Settings
This section allows customization of the AT dial commands
Modem Interface. Use the drop down menu to specify which modem
interface you want to adjust settings for (i.e., USB1, USB2, USB3,
Cardbus, ExpressCard).
interface you want to adjust settings for (i.e., USB1, USB2, USB3,
Cardbus, ExpressCard).
AT Dial Script.
Enter the AT commands to be used in establishing a
network connection. Each command must be entered on a separate
line. All command responses must include OK, except the final
command response, which must include CONNECT.
line. All command responses must include OK, except the final
command response, which must include CONNECT.
Example:
AT
AT+CGDCONT=2,”IP”,”isp.cingular”
ATDT*99***2#
Modem Password.
Enter the modem password, if required
Verify Modem Password.
Enter the modem password again to ensure it was entered correctly.
Disable Automatic Dialing. If you check this box then a modem won't dial unless you start it manually. Otherwise a modem will dial automatically
(if it is the highest priority available device).
(if it is the highest priority available device).
Make SIM PIN Permanent.
If Make SIM PIN Permanent is selected the entered PIN will be remembered between reboots. If a modem is plugged
in when this is selected the router will make a permanent association between the PIN and the current modem. When a PIN is associated with a
modem the PIN will be automatically entered for you when the associated modem is plugged in. If you choose Permanent PIN but there is no
modem plugged in at the time then no modem is associated with any PIN. The next time a modem is plugged in and a valid PIN is entered for the
modem the router will remember that association.
modem the PIN will be automatically entered for you when the associated modem is plugged in. If you choose Permanent PIN but there is no
modem plugged in at the time then no modem is associated with any PIN. The next time a modem is plugged in and a valid PIN is entered for the
modem the router will remember that association.
SIM PIN.
Enter your PIN number here. If Permanent PIN is not selected, this PIN number will be used with any modem plugged in until the router
is rebooted.
Access Point Name (APN).
Some wireless carriers provide multiple Access Point Names that a modem can connect to. If you wish to specify an
APN, enter it into this field. Some examples of APN are isp.cingular, ecp.tmobile.com and vpn.com. This APN will be set in the first profile
position (see Modem Diagnostics). The modem must be removed and reinserted for this change to take affect (or the router rebooted). This APN
is associated with the modem in the interface referred to in the Modem Interface drop down menu, so multiple APNs may be entered.
position (see Modem Diagnostics). The modem must be removed and reinserted for this change to take affect (or the router rebooted). This APN
is associated with the modem in the interface referred to in the Modem Interface drop down menu, so multiple APNs may be entered.
(continued)