Bose Lifestyle V30 Manual De Propietario
R
EFERENCE
English
49
Changing remote control switch settings
Each Lifestyle
®
remote control uses a house code that
corresponds to the house code set in the media center,
enabling the two to communicate. If another Lifestyle
enabling the two to communicate. If another Lifestyle
®
system nearby creates a conflict with your system, you
can easily set a new house code in your media center
and its remote control(s) with the steps that follow.
can easily set a new house code in your media center
and its remote control(s) with the steps that follow.
Using the remote control:
1.
Open the remote control battery cover and locate
the miniature switches (Figure 18 on page 50).
the miniature switches (Figure 18 on page 50).
2.
Move one or more of switches 1, 2, 3, or 4 in the
opposite direction from its current setting. Use a
paper clip, ballpoint pen, or similar object.
opposite direction from its current setting. Use a
paper clip, ballpoint pen, or similar object.
N o t e :
DO NOT change any other switch settings.
Moving other switches may disable your remote control.
3.
Replace the battery cover.
Using the media center:
1.
On the display module, press and hold the
On/Off button.
On/Off button.
2.
On the display module, press and hold the Mute
button. Your current house code will appear on
the display module in the form of four rectangles,
which represent the positions of switches 1
through 4:
button. Your current house code will appear on
the display module in the form of four rectangles,
which represent the positions of switches 1
through 4:
4.
While holding the Mute button, press any button
on the remote control. The media center displays
the new house code, which confirms its recognition
of the new code.
on the remote control. The media center displays
the new house code, which confirms its recognition
of the new code.
5.
Release the Mute button. The system remains off.
6.
If you have additional remote controls, change the
switches to match those of the first remote control
by following steps 1-3 above. You do not need to
repeat steps 4-5.
switches to match those of the first remote control
by following steps 1-3 above. You do not need to
repeat steps 4-5.
N o t e :
To verify your system’s house code, press the
display module Mute button while the system is off. The
display confirms the settings of switches 1-4.
display confirms the settings of switches 1-4.
HOUSE CODE:
Switches 1 - 4 down = 0 0 0 0 (current house code)
NEW HOUSE CODE:
(Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0)
(new house code)