Eagle journey Guía Del Usuario
62
while the unit is in automatic, as shown at right.
However, depending upon the bottom depth and
the current range, you can change the range to a
different depth. In the example screen shown at
right, the bottom depth has descended to a point
where you can change the range to XX feet. To
do this, select “CHART RANGE” from the “SO-
NAR OPTIONS” menu. Simply press the right or
left arrow keys to select a different range. When
you’re finished , press the EXIT key to erase the menu.
However, depending upon the bottom depth and
the current range, you can change the range to a
different depth. In the example screen shown at
right, the bottom depth has descended to a point
where you can change the range to XX feet. To
do this, select “CHART RANGE” from the “SO-
NAR OPTIONS” menu. Simply press the right or
left arrow keys to select a different range. When
you’re finished , press the EXIT key to erase the menu.
RANGE - Manual
You have complete control over the range when the unit is in the manual
mode.
You have complete control over the range when the unit is in the manual
mode.
To change the range, first make certain the unit
is in the manual mode. Next, select “CHART
RANGE” from the "SONAR OPTIONS" menu.
Simply press the right or left arrow keys to select
a different range. Press the left or right arrow keys
to decrease or increase the range. The available
ranges are 0-10, 20, 30, 40, 60, 100, 150, 200,
300, 500, 800, and 1000 feet. After selecting the
range, press the EXIT key to erase the range
menu.
is in the manual mode. Next, select “CHART
RANGE” from the "SONAR OPTIONS" menu.
Simply press the right or left arrow keys to select
a different range. Press the left or right arrow keys
to decrease or increase the range. The available
ranges are 0-10, 20, 30, 40, 60, 100, 150, 200,
300, 500, 800, and 1000 feet. After selecting the
range, press the EXIT key to erase the range
menu.
NOTE: The sonar’s depth capability depends on the transducer installa-
tion, water and bottom conditions, and other factors.
tion, water and bottom conditions, and other factors.
ZOOM
“Zooming” the picture is a common method used to enlarge small detail
and fish signals. To zoom the screen, simply press the ZIN (zoom-in) key.
This enlarges all echoes on the screen to twice their normal size. To re-
turn the screen to 2X or normal, simply press the ZOUT (zoom-out) key
until the desired zoom appears. When the unit is in zoom, “2X” appears in
the lower right corner of the screen, showing the current zoom mode.
“Zooming” the picture is a common method used to enlarge small detail
and fish signals. To zoom the screen, simply press the ZIN (zoom-in) key.
This enlarges all echoes on the screen to twice their normal size. To re-
turn the screen to 2X or normal, simply press the ZOUT (zoom-out) key
until the desired zoom appears. When the unit is in zoom, “2X” appears in
the lower right corner of the screen, showing the current zoom mode.