Garmin 3600a Guía De Operación

A login script is a series of commands that automates logging into your ISP. You can create login script files by selecting commands 

from in the Login Script dialog box. Some commands, such as Send, require additional information and have a parameter field to 

add the necessary data. You can also use non-ASCII and literal characters in your login script. See “Using non-ASCII Characters in 

Login Scripts” on the next page for more information.

1.  Follow the instructions to view details for a Service template (see 

2.  In the Details dialog box, tap 

Script.

3.  In the Login Script screen, tap the   

End pick list.

4.  Tap any of the following commands to select them from the pick list, and then enter additional information if a field  

appears:

• 

Wait For: Instructs your handheld to wait for specific characters from the TCP/IP server before executing the 

next  

command.

• 

Send: Transmits specific characters to the TCP/IP server to which you are connecting.

• 

Send CR: Transmits a carriage return or LF character to the TCP/IP server to which you are connecting.

• 

Send User ID: Transmits the User ID information entered in the User ID field of the Network Preferences screen.

• 

Send Password: Transmits the password entered in the Password field of the Network Preferences screen. If 

you did not enter a password, this command prompts you to enter one. The Password command is usually fol-

lowed by a Send CR command.

• 

Delay: Instructs your handheld to wait a specific number of seconds before executing the next command in the 

login script.

• 

Get IP (for SLIP connections): Reads an IP address and uses it as the IP address for your handheld. 

• 

Prompt: Opens a dialog box and prompts you to enter text of some kind (for example, a password or a security 

code).

• 

End: Identifies the last line in the login script.

5.  Repeat Steps 2 and 3 until you have completed the login script.
6.  Tap 

OK, and then tap OK in the Details dialog box.