Garmin 10 Guía Del Usuario

Appendix

1.  Position the accessory in the 

slots on the mounting spine of the 

Dakota.

2.  Slide the clip up until it locks in 

place.

To remove the clip, lift the bottom 

of the clip and slide the clip off the 

mounting spine.

The Dakota screen does not normally 

require calibration. However, if the 

buttons do not seem to be responding 

properly, use the following process.

1.  While the unit is turned off, press 

and hold   for approximately 30 

seconds.

2.  Follow the instructions on the 

screen until “Calibration is 

complete” is displayed.