Casio lw200-1av Guía Del Usuario

1

•

Button operations are indicated using the letters shown
in the illustration.

•

Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

Press .

•

Press 

B

 to change from mode to mode.

•

In any mode, press 

L

 to illuminate the display.

Use the Timekeeping Mode to set and view the current
time and date.

1. In the Timekeeping Mode, hold down 

A

 until the

seconds start to flash, which indicates the setting
screen.

2. Press 

B

 to move the flashing in the sequence shown

below to select other settings.

Seconds

Hour

Minutes

Year

Month

Day of week

Day

3. When the setting you want to change is flashing, press 

C

 to change it as

described below.

Seconds

Hour, Minutes, Year, Month,
Day, Day of week

Press 

C

 to reset to 

.

Press 

C

 to increase the setting.

Holding down 

C

 changes the setting at high speed.

•

Pressing 

C

 while the seconds are in the range of 30 to 59 resets them to 

 and

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press 

A

 to exit the setting screen.

•

The year can be set in the range of 2000 to 2099.

•

The watch’s built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after you have the watch’s battery replaced.

In the Timekeeping Mode, press 

C

 to toggle between 12-hour timekeeping and

24-hour timekeeping.

•

With the 12-hour format, the 

 (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.

•

With the 24-hour format, (

 indicator), times are displayed in the range of 0:00 to

23:59.

•

The 

 and 

 indicators are not displayed with the Timekeeping Mode time in the

Alarm Mode and Dual Time Mode.

•

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.

When the daily alarm is turned on, the alarm tone sounds
when the alarm time is reached.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.

•

Alarm setting (and Hourly Time Signal setting) is
available in the Alarm Mode, which you enter by
pressing 

B

.

The alarm tone sounds at the preset time for 10 seconds,
regardless of the mode the watch is in.

1. In the Alarm Mode, hold down 

A

 until the hour setting

starts to flash, which indicates the setting screen.

•

This operation automatically turns on the alarm.

2. Press 

B

 to move the flashing between the hour and

minutes.

3. While a setting is flashing, use 

C

 to increase it.

Holding down 

C

 changes the setting at high speed.

•

With the 12-hour format, set the time correctly as a.m.
(no indicator) or p.m. (

 indicator).

4. Press 

A

 to exit the setting screen.

Press any button.

In the Alarm Mode, press 

C

 to cycle through the on and

off settings as shown below.

Daily alarm 
only

Both off

Both on

Hourly Time 
Signal only

•

The alarm on (

) indicator flashes while the alarm is

sounding.

•

The alarm on (

) indicator and Hourly Time Signal

on (

) indicator are displayed in all modes.

In the Alarm Mode, hold down 

C

 to sound the alarm.

The stopwatch lets you measure elapsed time, split times,
and two finishes.

•

The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.

•

The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.

•

The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.

•

Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.

•

All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing 

B

.

(

displayed)

First runner 
finishes.
Display time of 
first runner.

Second runner 
finishes.

Display time of 
second runner.

The Dual Time Mode lets you keep track of time in a different time zone.

•

In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode.

1. Press 

B

 to enter the Dual Time Mode.

2. Hold down 

A

 until the hour setting starts to flash,

which indicates the setting screen.

3. Press 

B

 to move the flashing between the hour and

minutes settings.

4. Press 

C

 to increase the setting. Holding down 

C

changes the setting at high speed.

5. Press 

A

 to exit the setting screen.

MA0307-EA