Garmin 3600 Guía Del Usuario

Modem configurations let your iQue handheld use a connected modem to communicate with remote devices, such as your ISP or 

dial-in server, to access a remote computer. 
You must set Network preferences, in addition to configuring Modem settings, to be able to use TCP/IP software included in the 

handheld operating system to connect to remote devices.

1.  Tap the 

Home icon 

. Then tap the 

Prefs icon 

. 

2.  Tap the   pick list in the upper right corner of the screen and select 

Connection.

3.  Select 

Standard Modem and tap Edit. The name of the current configuration appears at the top of the screen.

4.  Tap the   

Connect to pick list and select the device you want to connect to.

5.  Tap the   

Via pick list and select the type of connection.

6.  In the Dialing pick list, tap 

TouchTone or Rotary. Select Rotary only if your telephone service does not support 

TouchTone dialing.

7.  Tap the   

Volume pick list and select the speaker volume for the modem.

8.  Tap the 

Details button at the bottom of the screen for the following additional settings:

•  Tap the   

Speed pick list and select the maximum speed for your modem to communicate with your handheld. 

(This setting does not control the speed at which your modem communicates with your telephone service.)

•  Tap the   

Flow Control (Flow Ctl) pick list, and select Automatic, On (Xon), or Off (Xoff) flow control for the 

modem connection.

•  If necessary, edit the Init String text to change the modem setup string. 

9.  Tap 

OK through each screen until you are returned to the Connection Preferences screen.