Garmin 660 Guía Del Usuario

Getting Started

1.  Locate the lithium‑ion battery that came in 

the product box.

2.  Slide the release key until the battery 

cover on the back of the zūmo pops up.

 

3.  Locate the metal contacts on the end of 

the lithium‑ion battery. 

4.  Insert the battery so that the metal 

contacts on the battery align with 

the metal contacts inside the battery 

compartment. 

5.  Replace the battery cover.

  CauTion: Always keep the battery 

installed when the zūmo is on.

  Warning: Do not use the suction cup 

mount on a motorcycle.

1.  Plug the automotive power cable into the 

power connector on the right side of the 

cradle. 

2.  Remove the clear plastic from the suction 

cup. Clean and dry your windshield and 

the suction cup with a lint‑free cloth. 

3.  Place the suction cup on the windshield. 
4.  Flip the lever back, toward the windshield. 
5.  Snap the cradle onto the suction cup arm.
6.  Fit the bottom of your zūmo into the 

cradle.

7.  Tilt the zūmo back until it snaps into 

place.

8.  Plug the other end of the automotive 

power cable into a power outlet in your 

car. 

9.  If you are using a traffic receiver in 

Europe, secure the antenna on the traffic 

receiver to the windshield using the 

suction cups. 

  Warning: This product contains a lithium-

ion battery. To prevent damage, remove the 

unit from the vehicle when exiting or store it 

out of direct sunlight.