Coby tf-dvd1574 Manual De Usuario

Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You

1

. 

can use 75 Ohm coaxial cable to connect outdoor antenna.

Insert one end of the supplied power cord to the player’s power jack and the other end to the 110-240V

2

. 

AC wall outlet.

The component port is capable of accepting high-definition signals from standard video sources. (e.g., cable/

satellite boxes, DVD players, VCRs, etc.)

Connect the Y/Pb/Pr port by the component cable to input the video signal.

1

. 

Connect “R” "L" port by the supplied AV cable to input the audio signal. The red/white plug of the AV

2

. 

cable is for the audio conneciton and the yellow plug for the video connection.

The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes,

DVD players, VCRs, etc.)

Connect the S-Video port by the S-Video cable to input the video signal.

1

. 

Connect the AUDIO-L/R port by the supplied AV cable to input the audio signal.

2

. 

The CVBS port is capable of accepting signals from standard video sources(e.g., cable/satellite boxes, DVD

players, VCRs, etc.)

Connect the VIDEO port with the yellow plug of the the supplied AV cable.

1

. 

Connect the L/R port with the red & white plug of the supplied AV cable to input the audio signal.

2

. 

The VGA port of the TV is capable of accepting high-definition signals from computers with a VGA output

jack. When used as a computer moniter, connect the VGA jack and the PC Audio In jack with a 15-Pin D-Sub

cable and a 3.5mm stereo audio cable.

HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video

signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection.

These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080-progressive).

External AV Source

Set the unit into the relative input mode

to enable the signal pass.