Coby dvd-228 Notas De La Versión

Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV 
manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box, 
contact your cable provider or the cable manufacture.  Once your TV is turned to the correct video line, you 
should see the “COBY” logo. 

 

 
ISSUE #2 ROLLING, COLORLESS SCREEN 

The DVD has been set to the incorrect broadcast system. NTSC is for the United States TV broadcast 
system. On the remote, press the N/P button 2-3 times (m

ake sure you do not have a disk in the tray) 

to 

select the correct broadcast system.

 

 
ISSUE #3 NO SOUND  

Make sure the Red and White wire is connected into the L & R.

Make sure the Red and White wire is connected into your TV “AUDIO IN”. 
 

You cannot connect the DVD through your VCR or TV/VCR combo. 
If you cannot connect the DVD player directly into your TV then you will need to purchase an RF Modulator 
and a four-foot coaxial wire at your local electronics store. 
 

The DVD player may be set to Progressive Scan Mode.  You will need to change the DVD player back to the 
Video Mode by using the remote control.  Point the remote control directly at the DVD player, and then press 
the VIDEO/PSCAN button 2-3 times (m

ake sure you do not have a disk in the tray)

.