KitchenAid ksrg25ftst Manual De Usuario

This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The 
concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the 
permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42 and 53.

■

It is essential that operational, maintenance, and filter 
replacement requirements be carried out for the product to 
perform as advertised.

■

Model WF-NL240V: Change cartridge at least every 6 months. 
Use replacement cartridge NL240V, part #4396509. 2008 
suggested retail price of $35.99 U.S.A./$59.95 Canada. Prices 
are subject to change without notice.

Model WF-L400V: The filter monitor system measures the 
amount of water that passes through the filter and alerts you 
to replace the filter. When 90% of the filter’s rated life is used, 
the filter indicator light changes from green to yellow. When 
100% of the filter’s rated life is used, the filter indicator light 
changes from yellow to red, and it is recommended that you 
replace the filter. Use replacement cartridge L400V, part 
#4396509. 2008 suggested retail price of $35.99 U.S.A./
$59.95 Canada. Prices are subject to change without notice.

■

The product is for cold water use only.

■

Do not use with water that is microbiologically unsafe or of 
unknown quality without adequate disinfection before or after the 
system. 

■

Refer to the front cover or “Assistance or Service” section for the 
Manufacturer’s name, address and telephone number.

■

Refer to the “Warranty” section for the Manufacturer’s limited 
warranty.

 

System tested and certified by NSF International against NSF/ANSI 
Standard 42 for the reduction of Chlorine Taste and Odor, Particulate 
Class II*; and against NSF/ANSI Standard 53 for the reduction of Lead, 
Mercury, Benzene, Toxaphene, p-dichlorobenzene, and Carbofuran.

Chlorine Taste/Odor
Particulate Class II

*

≥

50%

≥

85%

1.94 mg/L
833,333/mL

2.0 mg/L ± 10% At least 
10,000 particles/ml

0.05 mg/L
100,000/mL**

0.05 mg/L
40,667/mL

97.4%
88.0%

97.4%
95.1%

Lead: @ pH 6.5
Lead: @ pH 8.5

0.01 mg/L
0.01 mg/L

0.15 mg/L***
0.148 mg/L***

0.15 mg/L ± 10%
0.15 mg/L ± 10%

0.001 mg/L
0.003 mg/L

0.001 mg/L
0.001 mg/L

99.3%
97.9%

99.3%
99.0%

Mercury: @ pH 6.5
Mercury: @ pH 8.5

0.002 mg/L
0.002 mg/L

0.006 mg/L
0.0061 mg/L

0.006 mg/L ± 10%
0.006 mg/L ± 10%

0.0002 mg/L
0.0009 mg/L

0.0002 mg/L
0.00052 mg/L

96.60%
85.2%

96.6%
91.8%

Benzene

0.005 mg/L

0.014 mg/L

0.015 ± 10%

0.0005 mg/L

0.0005 mg/L

96.06%

96.06%

p-dichlorobenzene

0.075 mg/L

0.235 mg/L

0.225 ± 10%

0.0019 mg/L

0.0009 mg/L

99.1%

99.6%

Toxaphene

0.003 mg/L

0.014 mg/L

0.015 ± 10%

0.0012 mg/L

0.001 mg/L

92.7%

92.6%

Carbofuran

0.04 mg/L

0.077 mg/L

0.080 ± 10%

0.031 mg/L

0.0064 mg/L

61.03%

91.94%

Chlorine Taste/Odor
Particulate Class II

*

≥

50%

≥

85%

1.94 mg/L
833,333/mL

2.0 mg/L ± 10% At least 
10,000 particles/ml

0.05 mg/L
100,000/mL**

0.05 mg/L
40,667/mL

97.4%
88.0%

97.4%
95.1%

Lead: @ pH 6.5
Lead: @ pH 8.5

0.01 mg/L
0.01 mg/L

0.15 mg/L***
0.148 mg/L***

0.15 mg/L ± 10%
0.15 mg/L ± 10%

0.001 mg/L
0.003 mg/L

0.001 mg/L
0.0014 mg/L

99.3%
97.9%

99.3%
99.3%

Mercury: @ pH 6.5
Mercury: @ pH 8.5

0.002 mg/L
0.002 mg/L

0.0061 mg/L
0.0061 mg/L

0.006 mg/L ± 10%
0.006 mg/L ± 10%

0.0002 mg/L
0.0009 mg/L

0.0002 mg/L
0.00052 mg/L

96.60%
85.2%

96.6%
91.8%

Benzene

0.005 mg/L

0.014 mg/L

0.015 ± 10%

0.0005 mg/L

0.0005 mg/L

96.06%

96.06%

p-dichlorobenzene

0.075 mg/L

0.235 mg/L

0.225 ± 10%

0.0019 mg/L

0.0009 mg/L

99.1%

99.6%

Toxaphene

0.003 mg/L

0.014 mg/L

0.015 ± 10%

0.0012 mg/L

0.001 mg/L

92.7%

92.6%

Carbofuran

0.04 mg/L

0.077 mg/L

0.080 ± 10%

0.031 mg/L

0.0064 mg/L

61.03%

91.94%

Water Supply
Water Pressure
Water Temperature
Service Flow Rate

City or Well
30 - 120 psi (207 - 827 kPa)
33° - 100°F (0.6° - 37.8°C)
0.5 gpm (1.9 L/min.) @ 60 psi.

*

**

***

Class II particle size: >1 to <5
Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.
These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.

® NSF is a registered trademark of NSF International.