Lexmark c912 Instruccion De Instalación
Installing an option card
Your printer has one expansion card slot
that supports a number of option cards.
The following table describes their
function.
that supports a number of option cards.
The following table describes their
function.
Card
Function
MarkNet™ internal print server
Adds an Ethernet, Token-Ring, or Fiber port to connect your printer to a
network.
network.
Install a MarkNet N2501e or N2401e internal print server if you received
either of these cards as part of a multifunction printer upgrade.
either of these cards as part of a multifunction printer upgrade.
Serial/Parallel 1284-C Interface Card
Adds an RS-232C serial and 1284-C parallel interface port.
Coax/Twinax Adapter Card for SCS
Adds a coaxial/twinaxial network port.
802.11b Wireless Print Adapter
Connects to a MarkNet internal print server to add US or international
802.11b wireless printing capability.
802.11b wireless printing capability.
Note:
The network models ship with an Ethernet print
server already installed.
Warning:
Option cards are easily damaged by static
electricity. Touch something metal, such as the printer
frame, before you touch an option card.
frame, before you touch an option card.
You need a small Phillips screwdriver to
install these options.
install these options.
1
Remove the system board access
cover (see page 29).
cover (see page 29).
2
Remove the screw from the metal
plate that covers the connector
slot, and then lift the plate off.
plate that covers the connector
slot, and then lift the plate off.
Save the screw.
3
Unpack the option card.
Save the packing materials.
Install memory and option cards
35