Hitachi CP-WU8440 Guía Del Usuario

9

Setting up

►3ODFHWKHSURMHFWRULQDFRROSODFHZLWKVXI¿FLHQW

 The projector may shutdown automatically or may malfunction if its 

internal temperature is too high.
Using a damaged projector could result in a re and an electric shock.
•  Do not place the projector in direct sunlight or near hot objects such as heaters. 
• Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
•  Keep a space of 30 cm or more between a side of the projector and other 

objects such as walls.

•  Do not place the projector on carpet, cushions or bedding.
•  Do not stop up, block nor cover the projector's vent holes. Do not place 

anything around the projector that could be sucked in or stuck to the projector's 
intake vents.

•  Do not place the projector at places that are exposed to magnetic elds, doing 

so can cause the cooling fans inside the projector to malfunction.

►Avoid placing the projector in smoky, humid or dusty place. Placing the 
projector in such places could cause a re, an electric shock and malfunction of 
the projector.
•  Do not place the projector near humidiers. Especially for an ultrasonic 

humidier, chlorine and minerals contained in tap water are atomized and could 
be deposited in the projector causing image degradation or other problems.

•  Do not place the projector in a smoking area, kitchen, passageway or by the 

window.

• Position the projector to prevent light from directly hitting the 

projector's remote sensor.
• Do not place the product in a place where radio interference may be caused.
• Set the ALTITUDE of the SERVICE item in the OPTION menu correctly. It is 
recommended to leave it at AUTO usually (

69). If the projector is used with a 

wrong setting, it may cause damage to the projector itself or the parts inside.
• Keep heat-sensitive things away from the projector. Otherwise, they may be 
damaged by the heat from the projector.

CAUTION

NOTICE