Hitachi CP-WU8440 Guía Del Usuario

15

Using the security bar and slot

A commercially available anti-theft chain or 
wire can be attached to the security bar on 
the projector. Refer to the  gure to choose 
an anti-theft chain or wire.
Also this product has the security slot for 
the Kensington lock. 
For details, see the manual of the security 
tool.

When using the USB wireless adapter, be 
sure to connect the adapter to the further 
USB TYPE A

 port from the LAN port and 

use the supplied adapter cover.

1. 

Loosen the screw (marked with 
triangle) on the bottom left of the 

 ports.

2. 

Insert the tab of the cover into the 
hole at the upper right of the USB

 ports in the direction of the 

arrow.

3. 

Align the screw holes on the projector and the cover. Then 
insert the screw removed from the projector into the hole 

and tighten the screw.

►Do not use the security bars and slot to prevent the projector 

from falling down, since it is not designed for it.

►Do not place anti-theft chain or wire near the exhaust vents. 

It may become too hot. 

WARNING

CAUTION

• The security bar and slot is not comprehensive theft prevention 

measures. It is intended to be used as supplemental theft prevention measure.
• The safety bar (

4) can be used for the same purpose as the security bar. 

NOTE

Setting up

Fastening the adapter cover

►Keep small parts away from children and pets. Take care not 

to put in the mouth. 
►Heat may build up in the USB wireless adapter, to avoid possible burns 
disconnect the projector power cord for 10 minutes before touching the adapter.

WARNING

Tab