Hitachi CP-WU8440 Guía Del Usuario

Status Monitor <Only for CP-X8160, CP-WX8250 and CP-WU8450>

In error state

The Status Monitor displays a warning of an error
with larger letters. Resolve the errors referring to the
table of the sections "Related messages" (

119) and

"Regarding the indicator lamps" (

120, 121) when the

warning is displayed.
Displayed warnings are as below;

COVER: The lamp cover has not been properly xed.

Refer to the LAMP indicator blinking in the table (

120).

FAN: The cooing fan is not operating.

Refer to the TEMP indicator blinking in the table (

121).

LAMP: The lamp does not light.

Refer to the LAMP indicator lighting in the table (

120).

TEMP: The projector's interior becomes over heated.

Refer to the TEMP indicator lighting in the table (

121).

AIR (AIR FLOW): The internal temperature is rising.

Refer to the description of the message, "CHECK THE AIR FLOW" in the
table (

119).

COLD: There is a possibility that the interior portion has become over cooled.

Refer to the LAMP and TEMP indicators alternatively blinking in the table
(

121).

FILTR (FILTER): It is time to clean the air lter.

Refer to the LAMP and TEMP indicators simultaneous blinking in the table
(

121).

• When one of the warnings of FAN, LAMP, COVER, TEMP errors is

displayed, the backlight blinks at the same time.

NOTE

Displaying the condition of the projector (continued)

: Displays supplied voltage and peripheral temperature in Celsius

while the lamp is on.

3rd line

• While the projector is searching an input signal or USB TYPE A ports

are selected in normal condition, nothing is displayed on the 2nd line of the
monitor.
• When the USB TYPE B port is selected even if MOUSE is selected in the
USB TYPE B item of the OPTION menu, "NO SIGNAL" is displayed on the 2nd
line of the monitor (

67).

• Displayed temperature might differ from actual peripheral temperature
because the displayed temperature is measured inside of the projector.

NOTE

example