Hitachi CP-WU8440 Guía Del Usuario

43

EASY MENU

GAMMA

COLOR TEMP

NORMAL

1 DEFAULT

2 MID

CINEMA

2 DEFAULT

3 LOW

DYNAMIC

3 DEFAULT

1 HIGH

BOARD(BLACK)

4 DEFAULT

4 Hi-BRIGHT-1

BOARD(GREEN)

4 DEFAULT

5 Hi-BRIGHT-2

WHITEBOARD

5 DEFAULT

2 MID

DAYTIME

6 DEFAULT

6 Hi-BRIGHT-3

DICOM SIM.

7 DEFAULT

2 MID

• When the combination of GAMMA and COLOR TEMP differs 

from pre-assigned modes above, the display on the menu for the 

PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and 

COLOR TEMP (

44, 45) items in PICTURE menu.

• Lines or other noise might appear on the screen when this function 

is operated, but it is not a malfunction.

• DICOM SIM. is the projector's DICOM

®

 ("Digital Imaging and 

Communication in Medicine") simulation mode. This mode simulates 

the DICOM standard, which is a standard applicable to digital 

communications in medicine, and can be useful for displaying medical 

images, such as X-rays photos. This projector is not a medical device 

and is not compliant to the DICOM standard, and neither the projector 

nor the DICOM SIM. mode should be used for medical diagnosis.

Using the ◄/► buttons turns off/on the Eco mode.

See the ECO MODE item in SETUP menu (

55).

Pressing the ► button displays the INSTALLATION dialog.

See the INSTALLATION item in SETUP menu (

55).

Performing this item resets all of the EASY MENU items except the 

FILTER TIME and LANGUAGE.

A dialog is displayed for conrmation. Selecting the OK using the ► 

button performs resetting.

The usage time of the air lter is shown in the menu.

Performing this item resets the lter time which counts usage time 

of the air lter.

A dialog is displayed for conrmation. Selecting the OK using the ► 

button performs resetting. 

See the FILTER TIME item in OPTION menu (

67).

Using the ◄/► buttons changes the display language. 

See the LANGUAGE item in SCREEN menu (

59).

Press the ► or ENTER button to use the menu of PICTURE, 

IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or 

SECURITY.

Press the ◄ or ENTER button to nish the OSD menu.